RIBA Health & Safety Guide: What’s New in the Third Edition?
The RIBA has published the third edition of its Health & Safety Guide, bringing important updates for architects, architectural practices and Part 3 candidates working in England.
Building on the second edition, which focused on the statutory intent of Part 2A of the Building Regulations and the Higher-Risk Buildings Regulations, this latest edition places greater emphasis on the practical application of architects' responsibilities. Drawing on lessons learnt across the profession, it aims to help practitioners better understand how to fulfil their duties, demonstrate competence and manage health and safety throughout a building's lifecycle.
But what has actually changed, and what do architects need to know?
In this blog, we explore the three main areas of update: competence and professional obligations, building safety and dutyholder responsibilities, and regulatory and technical changes. We also consider how these updates might apply to a live project.
1. Competence and professional obligations
One of the overarching themes of the third edition is the increased emphasis on professional competence, accountability and the behaviours expected of architects within the post-Building Safety Act regulatory environment.
There are three key updates in this area.
The RIBA Health & Safety Test is now mandatory
Since 2025, Health and Life Safety has been introduced as a mandatory competence for RIBA Chartered Members working on projects in England. Successful completion of the RIBA Health & Safety Test is how Chartered Members demonstrate that they have met this competence.
The test forms part of the RIBA's wider competence framework and Continuing Professional Development (CPD) requirements, ensuring architects maintain an up-to-date understanding of the health and safety considerations involved in designing buildings that are safe to construct, inhabit, use and maintain.
This includes understanding relevant legislation, risk management principles and the architect's responsibilities within the wider project team.
The RIBA Health & Safety Guide is an important resource for translating these regulatory requirements into practical actions and informed design decisions. If you are preparing for the test, make sure you are working from the third edition.
Greater emphasis on demonstrating competence
The third edition also places greater emphasis on maintaining and demonstrating competence through appropriate skills, knowledge, experience and behaviours. While these principles are not new, their importance has increased considerably under the current regulatory framework.
For example, under the CDM Regulations, designers must have the necessary skills, knowledge, experience and behaviours to carry out their responsibilities safely and effectively. Similarly, Part 2A of the Building Regulations establishes competence requirements for designers undertaking design work on all buildings in England. Architects should therefore be able to demonstrate their competence through appropriate CPD, relevant project experience and up-to-date CVs, particularly when undertaking work on higher-risk buildings.
Importantly, competence is not simply about what you know. It is also about how you apply that knowledge, the decisions you make and how you evidence your professional capability.
The guide also provides further detail on the consequences of failing to satisfy Standard 3 of the Architects Code, including the potential for removal from the ARB Register. This is particularly important for Part 3 candidates to understand, as professional conduct and competence have implications beyond RIBA membership and can ultimately affect an architect's registration.
Reporting safety concerns under Principle 2.6.7
Another addition is further guidance on reporting safety concerns under Principle 2.6.7 of the RIBA Code of Professional Conduct.
This principle requires architects to take action where a client's decisions breach safety legislation and could adversely affect health and safety. Depending on the circumstances, this could include refusing consent or reporting concerns to building control. Architects naturally act in the interests of their clients, but this responsibility does not override their professional and legal obligations.
For example, if a client insists on making a design change that compromises fire safety or breaches building regulations, the architect must be prepared to challenge that decision and take appropriate action.
This can be an uncomfortable position, particularly when dealing with difficult client relationships or commercial pressures. However, the updated guidance reinforces the importance of understanding where an architect's professional responsibilities sit and knowing when to act.
2. Building safety and dutyholder responsibilities
The second group of updates relates to the evolving building safety regime, particularly the responsibilities of designers and principal designers under the Building Regulations dutyholder framework.
There are four key points to consider.
Greater emphasis on Building Regulations dutyholders
The third edition provides expanded guidance to help architects understand the approach and behaviours needed to competently deliver their services as designers, principal designers and lead designers under the Building Regulations dutyholder regime. These responsibilities apply to projects subject to building control approval, not just higher-risk buildings.
Architects must remember that they remain responsible for design work undertaken under their control, irrespective of any review, inspection or approval by the building control authority. What is particularly important in this edition is the focus on the practical delivery of these responsibilities. It is not enough to understand what the duties are. Practices must also consider how they resource, manage and monitor design work to meet the required standard of care.
This has direct implications for fee proposals, project programmes and team resources. Architects need to allow sufficient time and resources to undertake their statutory responsibilities properly.
The inclusion of lead designers alongside designers and principal designers is also noteworthy, particularly given the coordination responsibilities associated with the lead designer role.
Increased focus on the golden thread
Reflecting the post-Grenfell building safety reforms, the third edition places greater emphasis on the creation, management and sharing of accurate project information throughout the design, construction and occupation of buildings.
The golden thread is not simply a collection of documents produced at the end of a project. It is an accurate and up-to-date record of relevant building safety information that must be maintained throughout a building's lifecycle.
Architects contribute to this process by ensuring that the design information they produce
is accurate, appropriately managed and shared with the relevant dutyholders.
This requires a more proactive approach to information management, with responsibilities considered from the outset of a project rather than left until handover.
New secondary legislation: Keeping and Provision of Information Regulations 2024
The third edition also incorporates the Higher-Risk Buildings (Keeping and Provision of Information etc.) (England) Regulations 2024.
These regulations support the information management requirements associated with the golden thread approach. They should be considered alongside the other key pieces of secondary legislation introduced under the building safety regime, including the Higher-Risk Buildings (Descriptions and Supplementary Provisions) Regulations 2023 and the Building (Higher-Risk Buildings Procedures) (England) Regulations 2023.
For architects working on higher-risk buildings, understanding how these regulations interact is essential when considering information management and statutory responsibilities.
Mandatory occurrence reporting
The final update in this section is additional guidance on mandatory occurrence reporting.
The guide provides further information on identifying, recording and reporting safety-related events and risks as part of the evolving building safety regime.
For higher-risk building work, the principal dutyholders must establish a system that enables the prompt reporting of safety occurrences by designers, contractors and periodic visitors to site.
For architects, this means understanding what constitutes a potential safety occurrence, ensuring relevant issues are recorded and knowing which reporting route applies. It also reinforces the importance of maintaining accurate project records, with relevant information feeding into the golden thread.
3. Regulatory and technical updates
The final group of changes reflects developments in technical standards and industry practice since the second edition.
There are three important updates.
Removal of the national classification system: BS 476
The guide now reflects the transition within Approved Document B away from the national fire classification system under BS 476 and towards the European fire classification standards.
Architects should be familiar with the BS EN 13501-1 classification system for reaction to fire, which includes classifications from A1, representing the highest performance, through to F, representing the lowest, alongside smoke production classifications s1 to s3.
In practical terms, this means that architects reviewing older specifications or manufacturer literature that reference BS 476 classifications should check that the relevant fire performance is also demonstrated under the applicable European classification system.
Where there is uncertainty, this should be raised with the project's fire engineer.
BS 8670-1 replaces BSI Flex 8670
The second technical update is the replacement of BSI Flex 8670 with the ratified code of practice, BS 8670-1.
BSI Flex 8670 was previously referenced in the second edition as a transitional standard. It has now been replaced by BS 8670-1. Practices should therefore review their internal guidance documents, competence procedures and reference material to ensure they are referring to the current standard.
Introduction of the Code for Construction Product Information (CCPI)
The third edition introduces the voluntary Code for Construction Product Information (2025).
The CCPI aims to improve the quality, accuracy and clarity of construction product information and marketing. Manufacturers accredited under the scheme can provide specifiers with higher-quality and more reliable product safety information. This is particularly relevant when specifying construction products, where architects must ensure they have sufficient evidence to support their design decisions.
As discussed in relation to product certification, architects should not rely solely on CE or UKCA marking and should consider appropriate independent third-party certification.
CCPI accreditation can provide an additional indicator of the quality of manufacturer information. However, as the scheme is voluntary, it should complement rather than replace the necessary checks and verification processes undertaken by the design team.
4. What does this mean for architects and Part 3 candidates?
The third edition is not a complete rewrite of the guide. The core structure covering site safety, design risk management, legislation, CDM, the Building Safety Act, building safety design and fire safety design remains.
What has changed is the emphasis on how architects practically deliver their responsibilities, demonstrate competence and respond when things do not go to plan.
For Part 3 candidates and practising architects, there are several important takeaways:
Use the latest guidance: Make sure you are revising from the third edition, particularly if preparing for the RIBA Health & Safety Test.
Understand competence: Be able to explain how competence links to the CDM Regulations, Part 2A of the Building Regulations, the Architects Code and the RIBA Code.
Know your professional obligations: Understand Principle 2.6.7 of the RIBA Code and the action expected when a client's decisions breach safety legislation.
Understand the golden thread: Be familiar with the information management requirements, the 2024 Keeping and Provision of Information Regulations and mandatory occurrence reporting.
Update your technical knowledge: Understand the transition from BS 476 to European fire classifications, the replacement of BSI Flex 8670 with BS 8670-1 and the introduction of CCPI.
It is also worth reflecting on how your own practice resources and manages projects in light of the Building Regulations dutyholder requirements. Competence is not just an individual responsibility; practices must ensure they have the appropriate systems, resources and processes in place to support their teams.
Key takeaways
The third edition of the RIBA Health & Safety Guide reinforces the profession's increasing responsibility to deliver safe, compliant and well-managed buildings.
The key changes can be summarised across three areas:
Competence and professional obligations: Mandatory Health & Safety Test requirements for RIBA Chartered Members working on projects in England, greater emphasis on demonstrating competence and additional guidance on reporting safety concerns.
Building safety and dutyholder responsibilities: Expanded guidance for designers, principal designers and lead designers, increased emphasis on the golden thread, the incorporation of the 2024 information regulations and further guidance on mandatory occurrence reporting.
Regulatory and technical updates: The move away from BS 476 towards European fire classifications, BS 8670-1 replacing BSI Flex 8670 and the introduction of the voluntary Code for Construction Product Information (2025).
Ultimately, the message is clear: architects must be able to demonstrate not only that they understand their health and safety responsibilities, but that they have the competence, resources and professional judgement to put them into practice.




Comments